|
Download
Brochure (PDF)
Download
Brochure, intrinsic safe version (PDF)
 View
Demo Video
 Request
Demo CD
Parts
Catalog (PDF)
Sensors
Product Catalog (PDF)
Cables
Product Catalog (PDF)
Catálogo
(PDF)
|
|
A New Choice for
Vibration Analysis
Enjoy the benefits of free
updates, low ownership cost and unlimited tech
support from the proven leaders of maintenance technology.
VIBXPERT
is a lightweight, 2-channel, FFT data collector/vibration analyzer for
monitoring and diagnosis of machine conditions. As a data collector,
VIBXPERT records all forms of machine vibrations, bearing conditions,
process data and visual inspection information.
Collected machinery data is stored on an expandable Compact
Flash Card (up to
8
gigabyte) and is transferred to the OMNITREND
maintenance software for further evaluation, report generation and
archiving.
VIBXPERT
provides comprehensive analysis functionality for the diagnosis of complex
vibration problems, with an easy to use icon-driven platform. Its
capabilities include: order spectrum, phase, cepstrum, cross-channel
phase, orbits, run-up and coast-down measurements. Analysis tools,
including various cursor types, machine-specific frequency markers, signal
post processing, and extensive bearing databases are included for
evaluating each spectrum. With an Fmax of 51KHz, up to 102,400 Lines of
Resolution and a large ˝ VGA screen, all machinery problems can be
captured and easily analyzed. Alarm
notifications based on ISO10816 or user-defined standards are identified
with the aid of colored LEDs. If any of the spectrum’s broadband or
narrow band limits are exceeded, the LEDs are also activated.
|
The
robust housing has an ingress protection rating of IP65, dustproof and
water resistant, weighing only 2 pounds. The VIBXPERT is delivered with a
carrying pouch having a breakaway shoulder strap for safety. The basic
VIBXPERT platform is a 1-channel device, which can be upgraded to 2
individually configured channels via a special passcode. This upgrade does
not require changes to the hardware. VIBXPERT can accept all sensor types
for analog measurements. Several communications interfaces are supplied,
including a trigger input, Ethernet, USB and serial connection (RS232).
|
|
|
Balancing
Module
1-plane and simultaneous 2-plane balancing. Using the
balancing program is extremely intuitive via the graphical user guide
which leads the user through the balancing procedure step-by-step. A
variety of balancing methods can be selected free (protractor)
balancing, fixed mass, fixed locations or tape measure balancing. If
necessary, all the attached masses can also be combined into a single
mass. If it is not possible to add mass to a rotor, then the VIBXPERT
can be reconfigured on the fly to calculate the mass that must be
removed from the rotor. Built-in ISO tolerances alert the user when
the equipment is within specification. Diagnostic tools, including
phase, spectrums and time waveforms are incorporated in this program
to confirm unbalance is truly causing the vibration.
Shock
Pulse Lubrication Measurement
VIBXPERT uses Shock
Pulse and Acceleration Enveloping for lubrication measurement and
early detection of bearing and gear problems. Shock Pulse can confirm that
grease
has entered the bearing and is lubricating properly. The Shock Pulse Carpet
value measures the lubrication condition of the bearing while Shock Pulse
Max tells one if the bearing has sustained internal damage. Shock Pulse is
easy to use! Data can be trended over time on screen or with the OMNITREND
PC software.
|
