|
The
VIBSCANNER® lightweight data collector features built-in
sensors for ten important machine parameters: vibration acceleration,
displacement and velocity according to ISO standards as well as Shock
Pulse for bearing damage and lubrication condition, pump
cavitation,
process parameters, inspection codes, temperature and RPM. Options for
vibration Spectrum, Time
Waveform, one or two plane Balancing
and Shaft Alignment are also available.
Simple to operate with joystick navigation and crisp backlit graphic
display.
Measurement function includes Visual Inspection tasks.
Collected
measurement data can be trended, analyzed and archived with the OMNITREND®
PC software. VIBCODE®
compatible. Intrinsic safety (optional).
The 'FFT
Module' enables amplitude and envelope spectra
to be measured for bearing, gear and
machine diagnosis. The measurement settings
are optimized to the type of machine
and RPM range.
Example:
The user selects 'high-speed gears' and
VIBSCANNER®
measures an envelope spectrum of 0 to
5kHz.
For
evaluation, the spectrum can be magnified or
reduced as much as required in both the
X and Y directions using the joystick. The 10
highest amplitudes are clearly listed and can
be zoomed directly by pressing a key (‘Max10-Zoom’).
Balancing
Module Modes: 1-plane and sequential 2-plane balancing. The
extremely simple operation of the
program is ensured by its intuitive, graphical user
guide that leads the user through the balancing
procedure step-by-step. Different
balancing methods can be selected: free
balancing, fixed mass, fixed location or tape
measure balancing. If necessary, all the attached
masses can also be combined into a single
mass. If it is not possible to attach a mass,
VIBSCANNER®
can also calculate the mass that must
be drilled out of the rotor.
The
Time Waveform Module enables the VIBSCANNER®
to perform functions like time waveform, sequential
orbits, recording of overall values, FFT spectra and time synchronous
averaging for FFT.
Shock
Pulse Lubrication Measurements
VIBSCANNER®
is revolutionizing Condition Based Maintenance of bearings around the
world! VIBSCANNER®
uses Shock Pulse to detect lubrication condition and bearing damage.
It indicates whether grease has entered the
bearing with pre and post readings. The Shock Pulse Carpet value measures the lubrication condition of the
bearing while Shock Pulse Max tells one if the
bearing has sustained internal damage. Shock
Pulse data can be trended over time on screen or with the OMNITREND®
PC software.
Pump
Cavitation Measurement
VIBSCANNER®
measures
cavitation noise to evaluate the pump condition. The data can be
trended over time on screen or with the OMNITREND®
PC software.
|
