|
|
|
'Plug-N
Play' Online Condition Based Machine Monitoring
VIBROWEB,
is the automated solution to an existing route-based CbM Program. The
Black Box Technology replaces pre-installed switch boxes, connected to
permanently mounted transducers. This dynamic system can be configured and
changed in the field to accept a wide variety of sensor technologies. A
“Plug-N Play” card configures each sensor for up to 32 channels. Eight
additional inputs are available for speed measurements. All sensors are
powered simultaneously to greatly reduce data collection cycle time!
Remote
monitoring of production machinery such as rolls, presses, conveyors,
motors, pumps, gearboxes and fans, can be accomplished from the comfort of
your office. Vibroweb monitors and stores vibration, bearing condition,
temperature, speed, process parameters, FFT spectrum, envelope and time
signal information. Machinery conditions can then be accessed via a Network
Connection.
Alarm
notifications and tele-diagnosis is accomplished through any Internet
browser. OMNITREND
PC software provides additional programming, trending, evaluation and
archiving of the machinery’s condition.
See
also SIGNALMASTER and VIBROWEB XP |
