The WINPLUMB program handles the communication between the laser transducer and computer so that the user does not need to manually record readings. The accurate compensation for vibration is a software engineering feature that makes the PERMAPLUMB effective. WINPLUMB can be configured for up to 2 radial or guide bearings, and a thrust bearing (3 to 12 pads). The result screen will show the angle of the shaft from plumb in 2 planes 90° apart. In addition, it will show the correction at each bearing or thrust pad in both planes. The thrust pad corrections can be displayed "all pad moves up" (shim type) or "all pad moves up and down" (adjustment screw type). WINPLUMB features a "MOVE" function that displays changes to the centerline plumbness while you make corrections. In essence, using WINPLUMB it is now possible to simply move the shaft (by adjusting either pads or guides) until the display shows zero. At that point the centerline will be plumb. WINPLUMB also contains functions for evaluating rigidity across a vertical shaft coupling. It is also useful for monitoring changes to plumbness, while balancing the load on the thrust pads.

Order No. L 310.84 PC Software w/1 license
Order No. L 310.85 PC Software upgrade* w/1 license

*The upgrade version is only available for licensed users of PLUMB 

System requirements
System: Windows 98, NT, 2000 & XP
CD drive: for installation
Monitor: VGA color
Mouse: required
Serial Interface: 1 port required for connection to PERMAPLUMB module box
Printer: Windows compatible