EDDYTHERM microprocessor controlled Induction Heater for bearings and other objects allows precise setting of time or temperature to prevent premature bearing failures due to overheating. Temperature probe continuously measures and screen displays actual temperature. "Stand by" feature permits holding temperature at pre-set level for an indefinite time. Automatically demagnetizes workpieces after heating. Light and buzzer signal termination of heating/demagnetizing cycle. Three Industrial Bearing Heaters models available. Shrink-fitting bearings, sleeves, sprockets, couplings, impellers, crane wheels and gears, etc., of up to 900 lbs. is made easy, clean and quick.

Order No. ETH 17.110
EDDYTHERM 1x Industrial Bearing Heater package, suitable for bearings up to 25 lbs. in weight, including magnetic temperature probe ETH 7305 and crossbars ETH 7651, 7653, and 7655. Electric current: 115V, single phase

Order No. ETH 17.500/2 
EDDYTHERM 1-6 Industrial Bearing Heater package, suitable for bearings up to 90 lbs. in weight, including magnetic temperature probe ETH 7305 and crossbars ETH 7652, 7654 and 7656. Electric current: 480V,
single phase

Order No. ETH 17.500/4
Ditto, except 220V

Order No. ETH 17.440/3-60 

Order No. ETH 17.440/4-60
Ditto, except 600V

EDDYTHERM 1-6 Industrial Bearing Heater

EDDYTHERM 4X Industrial Bearing Heater

Optionally available: 

Crossbars and clip-type temperature probes.