  EDDYTHERM 1-6
EDDYTHERM 1X
EDDYTHERM 4X
Ask
about our optional crossbars and clip-type temperature probes. Download
brochure (PDF)
|
|
EDDYTHERM microprocessor controlled Induction Heater
for bearings and other objects allows precise setting of time or temperature to prevent
premature bearing failures due to overheating. Temperature probe continuously measures and
screen displays actual temperature. "Stand by" feature permits holding
temperature at pre-set level for an indefinite time. Automatically demagnetizes workpieces
after heating. Light and buzzer signal termination of heating/demagnetizing cycle. Three
models available. Shrink-fitting bearings, sleeves, sprockets, couplings, impellers, crane
wheels and gears, etc., of up to 900 lbs. is made easy, clean and quick.
 Order No. ETH
17.110
EDDYTHERM 1x
package, suitable for bearings up to 25 lbs. in weight, including magnetic
temperature probe ETH 7305 and crossbars ETH 7651, 7653, and 7655. Electric
current: 115V, single phase
Order No. ETH
17.500/2
EDDYTHERM 1-6 package, suitable for bearings up to 90 lbs. in weight,
including magnetic temperature probe ETH 7305 and crossbars ETH 7652, 7654
and 7656. Electric current: 480V,
single phase
Order No. ETH
17.500/4
Ditto,
except 220V
Order
No. ETH 17.440/3-60
EDDYTHERM
4x
package, suitable for bearings up to 900 lbs. in weight, including magnetic
temperature probe ETH 7305 and one crossbar ETH 7640 (75 x 75 x 460mm).
Electric current: 480V, single phase
Order No. ETH
17.440/4-60
Ditto,
except 600V
Testing and Time Study Service
It is difficult to determine how long it takes to heat gears, impellers, couplings,
bearings and other workpieces from ambient to the target temperature for proper shrink
fitting. Theoretical calculations are not always reliable, since so many factors such as
ID, OD, width, material, configuration of workpiece and weight come into play.
We offer you the services of our induction heater lab to
conduct tests on your samples. This will guarantee that you can duplicate achieved and
documented results in your facilities with the recommended heater and selected crossbars. |
