Ludeca

Title


OPTALIGN PLUS
File Size Date Requirements and Specs
Firmware Upgrade Manager 2.05
OPTALIGNPlusUpdate2.05.exe
370 KB 8/4/08 ALI 5.221 or ALI 5.222 cable

Version Notes 

OPTALIGN PLUS 2.05

  • Sensor update for sector issues.
  • Instructions: Extract files and run OPTAPLUP.EXE.

OPTALIGN PLUS 2.03

  • Fix for the OPTALIGN PLUS direct print ASCII file line-shift bug for the position of the thermal growth values.

OPTALIGN PLUS 2.00

  • OPTALIGN PLUS SERIES compatibility
  • Use with OPTALIGN PLUS Explorer PC software v2.2x

IMPORTANT: Firmware version 2.x IS NOT supported by the Optalign PLUS Commander PC software.

OPTALIGN PLUS 1.24

  • Report layout improved: 
    Additional comment line. 
    Added page numbering in both report types (text and graphical).

  • Changing F-82 Averaging during a set of Multipoint or Static readings takes effect immediately.

  • Improved averaging, range restricted to 2...7 (equals an average number of 4 to 128)

  • Minor changes regarding F-84 setting (High/Low resolution)

  • Inch mode Coupling results print in high resolution independent of F-84 setting. In Move Move values are displayed as per F-84 setting.
    Correction results in printed report are printed according to the F-84 setting.

  • In graphical report, the left side soft foot values are now printed.

  • In graphical report, the dimensions to the left machine are printed in report if needed (static feet settings or left machine has values for thermal growth).

IMPORTANT: This firmware version IS supported by the Optalign PLUS Commander PC software. This FW version is only available upon request.

Request operating manual in PDF format.      
OPTALIGN PLUS SERIES License Manager
LMPLUSSeries.exe
1005 KB 6/23/04 Tool to configure ALI 5.100-S and ALI 5.100EX-S transducers for additional firmware features
(ALI 5.280 - ALI 5.290).
Instructions
PC Display software 1.04
plusdisplay1.04.exe
1088 KB 2/25/03  
01-597-01 OPTALIGN PLUS Quick Reference
F74 Default: Coupling Results
plusqckref122clpg.pdf
296 KB 2/7/02

Depending on the feature level of your tool, not every feature described on these forms may be available to you.

For FW 1.20 or higher

01-597-01 OPTALIGN PLUS Quick Reference
F74 Default: Foot Results
plusqckref122foot.pdf


295 KB 2/13/02
01-198-01 OPTALIGN PLUS Alignment Recording Form
plusrecordingform120.pdf
260 KB 1/11/02
Straightness Spreadsheet
plus_st3.xls
    L 545set brackets
Go to Tech Notes      
Go to Alignment Center     ALI 5.221 or ALI 5.222 cable
Go to L 621 USB-to-Serial Adapter      
Printing Tool      
Driver for VIB 5.448 USB-to-Serial Adapter   6/23/11