Version Notes
HW Requirements: SYS 2.711-2 cable
BORALIGN
1.20 for Rotalign PRO
- Report includes the X and Y presets in the results
table
and printed report.
- The report describes the graph type, i.e. if the
presets
are included or not.
- Added 'Are you sure?' message on deleting a bore & data
from
the Dimension screen to ensure that this action is correct.
- The XY or HV titles within Results screen are now
changed
immediately on returning from the menu.
- The MENU key has been deactivated within the measure
plane
screen to ensure that a center measurement is not inadvertently
deleted.
- Within the PROGRAM MANAGER it is now possible to change
the
default settings for America, Asia & Europe.
BORALIGN
1.19 for Rotalign PRO
- Measurement can be resumed with the current
laser setup, for example after changing batteries.
- Clear measurement status information. For each
bore a "s" (static laser) and a "r" (rotating laser) are
shown for the laser setup(s) selected.
- Dimensions view is always shown when opening a saved
file.
- The last entry is highlighted by default in
the file list, laser setup and measurement tables.
- New column was added to the laser setup table
showing a symbol for the laser mode used.
- Laser setup table and measurement table have
been made visually clearer.
Please download the 1.19 release
notes (PDF file) before you start using this firmware.
 Back
to Upgrades and Downloads Page
| 
